Cp2102 For Mac Os

Posted on  by 

  1. Cp2102 Driver Install
  2. Cp2102 Mac Os Mojave
  3. Cp2102 Macos Catalina
  4. Cp2102 For Mac Os High Sierra
  5. Cp2102 For Mac Os 10.10

Mac OS X compatibility: We have confirmed that our CP2102-based devices work on Mac OS X 10.7 and other customers have used them successfully on older versions. We can assist with advanced technical issues, but most of our tech support staff does not use Macs, so basic support for Mac OS X is limited. CP2102 USB-to-Serial Bridge Driver. This module is based on the CP2102 Single-Chip USB-to-UART Bridge. CP2102 is a great alternative for the more commercially popular FT232 chips. The CP2102 includes a USB 2.0 full-speed function controller, USB transceiver, oscillator, EEPROM, and asynchronous serial data bus (UART) with full modem. Stable and reliable chipset CP2102 USB specification 2.0 compliant with full-speed 12 Mbps Standard USB type A male and TTL 5pin Supports windows vista or xp or server 2003/200, Mac OS-X/OS-9, Linux.

Cp2102 mac os mojaveFor

Cp2102 Driver Install

Windows

Cp2102 Mac Os Mojave

TS-990S, TS-890S, TS-590SG, TS-590S, TH-D72A/E
KPG-22U, KPG-46U, KPG-186U
Virtual COM Port Driver		Last updated : August 21, 2019
Introduction
Thank you for choosing the KENWOOD transceivers. You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided.
This virtual COM port driver installation program is provided by Silicon Laboratories Inc.
After reading through the following explanations, feel free to download and install the software.
Operating Environment
1.Operating System (OS)
Windows® 7 (32-bit or 64-bit)
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
2.Peripheral Devices
USB 2.0 interface.
Installing the virtual COM port driver
ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver.
Extract the downloaded file ('CP210x_Windows_Drivers.zip' for Windows® 7/8.1, or 'CP210x_Universal_Windows_Driver.zip' for Windows® 10) into a designated folder.In the designated folder, a folder labeled 'CP210x_Windows_Drivers' or 'CP210x_Universal_Windows_Driver' will be created.
In the created folder, double click the 'Cp210xVCPInstaller_x86.exe' with 32-bit OS, or the 'Cp210xVCPInstaller_x64.exe' with 64-bit OS, and follow the instructions that appear on the display to install the virtual COM port driver.
Connecting the device to a PC
Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver. The PC will detect new hardware.
The installation of the device driver software will start automatically.
If a reboot request appears, please reboot the PC.
Confirming the COM port number
Open the 'Device Manager' to confirm which COM port number is assigned for connection with the device.
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.)
For Windows® 7
1. Click the Windows® [Start] button.
2. Right-click [Computer], then click [Properties].
3. Click [Device Manager] in the displayed window.
4. [Device Manager] window will appear.
For Windows® 8.1 and Windows® 10
1. Right-click the Windows® [Start] button.
2. Click [Device Manager] in the displayed window.
3. [Device Manager] window will appear.
Click “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different depending on your PC.
In the above example, “Silicon Labs CP210x USB to UART Bridge (COM3)” is listed. This means that COM3 is assigned for the connection with the transceiver.
Select this port number in the configurations for communication in the software you are using.
Note:
When connecting a TS-890S transceiver to the PC, 2 virtual COM ports are assigned as follows.
In the TS-890S Menu settings, these 2 virtual COM ports are defined as [Virtual 'Standard' COM Port] and [Virtual 'Enhanced' COM Port].
These 'Standard' and 'Enhanced' virtual COM ports are distinguished as follows.
•Double-click on these in the Device Manager to display the respective Properties windows.
•Select the 'Details' tab and then select 'Location Paths' (or 'Rutas de acceso de ubicación':Español, 'Chemins d'accès des emplacements':Français, 'Speicherortpfade':Deutsch, 'Percorsi':Italiano, 'Locatiepaden':Nederlands) from the Property drop-down menu.
•Move the mouse cursor to the line displayed in the 'Value' column (the top line if multiple lines are displayed) and check the number in the parenthesis on the right end of the character string.
The port displayed with the number (1) is the virtual COM (Standard) port of the transceiver.
In the display example above, the virtual 'Standard' COM port is assigned to COM3.
The port displayed with the number (2) is the virtual COM (Enhanced) port of the transceiver.
In the display example above, the virtual 'Enhanced' COM port is assigned to COM4.
Please also refer to the TS-890S Instruction manual for details.
If you agree with the details listed above, click one of the following links corresponding to each OS to download the virtual COM port driver installation program.
For Windows® 7/8.1：
'CP210x_Windows_Drivers.zip'(v6.7.6) 6.83MB download
For Windows® 10：
'CP210x_Universal_Windows_Driver.zip'(v10.1.8) 878KB download
You can also download the latest and earlier versions virtual COM port driver installation program from the Silicon Laboratories website. (The URL link is subject to change.).
Microsoft®, Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Cp2102 Macos Catalina

The Silicon Labs CP2102 USB to RS-232 Serial Driver for Apple Mac OS X isthe reliable interface between your CP2102 based cable and your Mac. Thedriver supports over 100 CP2102 based dongles and USB interfaces, likedevices of Renesas, Pirelli, NetGear, MEI, Nokia, Kyocera, Juniper,Starizona, ESP8266 NodeMCU, Infinity, Aruba Networks and many otherdevices using this chip.

Cp2102 For Mac Os High Sierra

Features¶

Cp2102 For Mac Os 10.10

Mac
  • Silicon Labs CP2102-based cables
  • Reliable and stable data transfer
  • Unix file-descriptor access (/dev/cu.Repleo-CP2102-xxx,/dev/tty.Repleo-CP2102-xxx)
  • Apple’s IOKit implementation
  • Baudrates (300, 600, 1200, 4800, 9600, 19200, 115200, 230400)
  • Databytes (5, 6, 7, 8)
  • Stopbits (1, 2)
  • Manual and hardware handshake signal control (RTS, DTR, CTS, DSR, CD,RI)
  • Sending break signals (for Cisco routers)
  • Compiled for OS X 10.13-I64 (High Sierra), OS X 10.12-I64 (Sierra)

Coments are closed
Youtube For Mac Download Free Wallpaper For Mac Os X Hd